Detect vehicle occupants more reliably with advanced imaging systems.

The Vehicle Occupancy Imaging System (VOIS) leverages Perceptics' superior imaging capabilities to count occupancs in a vehicle. The VOIS captures an image of the inside of the vehicle and reports on the number of people in the vehicle, resulting in highly accurate data for HOV enforcement. In addition to obtaining occupant counts, the quality of the image makes it possible to observe driver behavior such as cell phone and seatbelt use.

When paired with the Perceptics License Plate Reader and USDOT Number Reader, the Driver Compliance Enforcement Camera provides more data for officers to ensure safety and compliance. 

Product Highlights

  • Easily integrated with current systems
  • Penetrates tinted windows
  • Output can be customized to match your business rules and adhere to privacy laws
Benefits + Features

Can be front or side mounted

Integrated optical character recognition engine

Sophisticated OCR technology ensures highly accurate counts while reducing false positives

Specifications

System Components

One utra high resolution imager:

  • 5MP camera with pre-selected and pre-set lens
  • Embedded system and OCR software specific for driver camera systems

One Stroboscopic Illuminator

One Post Mounting Arm Kit

One Cable Kit

Optional trigger sensors, posts, and junction boxes available

Power & I/O

Input Voltage: 120VAC, 155W continuous

Maximum Input Power: 1305W (peak) during illuminator charge cycle of ~100msec

10/100 Mbps Ethernet port

Operating Conditions

Operating Temperature: Operating Temp: -40°F to 158°F (-40°C to 70°C)

Humidity: 10%~90% (non-condensing)

Protection Rating: IP67

Physical Characteristics

Imager Dimensions:

  • Front: 6.6"W x 6.4"H x 30.25"D (168mm x 163mm x 768mm)
  • Side: 6.6"W x 6.4"H x 12"D (168mm x 163mm x 396mm)

Imager Weight:

  • Front: 10lbs (4.55kg)
  • Side: 9.8lbs (4.5kg)

Illuminator Dimensions:

  • Front: 7.7"W x 7.4"H x 22.7"D (196mm x 188mm x 577mm)
  • Side: 7.7"W x 7.4"H x 22.7"D (196mm x 188mm x 577mm)

Illuminator Weight:

  • Front: 18.5lbs (8.4kg)
  • Side: 18.5lbs (8.4kg)

Material: Marine grade anodized aluminum

Connectors: 3-pin power, 4-pin signal, 6-pin trigger, Ethernet

Ultra High Resolution Imaging & Illumination

5MP resolution

Field of view (depends on lane geometry):

  • Front: 8' x 5'
  • Side: ~4 x 3.2'

Operating range (depends on lane geometry):

  • Front: ~23' typical
  • Side: ~7' typical

Lens options:

  • Front: 75mm - 100mm
  • Side: 25mm - 35mm

Windows must have 30% visible light transmission or higher

Light source: Xenon gas discharge lamp

Illuminator output: 30 joules

Recharge time: 200 ms

Lamp life: 40,000,000 flashes

Image Sensor

Sensor size: 2576 x 2048 active pixels

Sensor type: Quad Super eXtended; Graphics array (QSXGA) CMOS

Sensor readout: Random programmable region of interest (ROI), global shutter

Optical size: One inch

Pixel size: 4.8μm x 4.8μm

Pixel bit depth: 10-bits

High Dynamic Range (HDR)

On-chip Fixed Pattern Noise (FPN) Correction

Automatic Exposure Control (AEC)

Serial Peripheral Interface (SPI)